Florida-based. Focused on the Americas.Sell your equipment
Used SIDEL Bottling Line, 19,000 BPH — photo 1
20 photosSelect a photo to enlarge
Used SIDEL Bottling Line, 19,000 BPH — photo 11Used SIDEL Bottling Line, 19,000 BPH — photo 22Used SIDEL Bottling Line, 19,000 BPH — photo 33Used SIDEL Bottling Line, 19,000 BPH — photo 44Used SIDEL Bottling Line, 19,000 BPH — photo 55Used SIDEL Bottling Line, 19,000 BPH — photo 66Used SIDEL Bottling Line, 19,000 BPH — photo 77Used SIDEL Bottling Line, 19,000 BPH — photo 88Used SIDEL Bottling Line, 19,000 BPH — photo 99Used SIDEL Bottling Line, 19,000 BPH — photo 1010Used SIDEL Bottling Line, 19,000 BPH — photo 1111Used SIDEL Bottling Line, 19,000 BPH — photo 1212Used SIDEL Bottling Line, 19,000 BPH — photo 1313Used SIDEL Bottling Line, 19,000 BPH — photo 1414Used SIDEL Bottling Line, 19,000 BPH — photo 1515Used SIDEL Bottling Line, 19,000 BPH — photo 1616Used SIDEL Bottling Line, 19,000 BPH — photo 1717Used SIDEL Bottling Line, 19,000 BPH — photo 1818Used SIDEL Bottling Line, 19,000 BPH — photo 1919Used SIDEL Bottling Line, 19,000 BPH — photo 2020
The equipment in detail

Full technical description

Used SIDEL Bottling Line, 19,000 BPH is listed in our complete bottling lines inventory under reference NP 725. Manufacturer: SIDEL. Model: bottling line. Listed year: 2019. Listed output: 19,000 bottles/hr. Actual output must be assessed for your product and container format.

Product: still water
Speed: 19,000 bph
SIDEL preform hopper
Year: 2019
SIDEL preform orientator
Year: 2019
SIDEL PET blow moulder
Model: MATRIX
Year: 2018
8 cavities GME 30.38
SIDEL PET blow moulder
Model: SBO 4/4
Year: 1996
4 cavities PCO CORVAGLIA
Bottle unscrambler Posimat
Model: N-20
Year: 2004
Silos for blown bottles Posimat
Model: STAINLESS STEEL SILO
Year: 2007
SIPA filling monoblock
Model: STILLFILL S 40-40-12 AOR P=113
Year: 2010
Direction of rotation: counterclockwise
Rinser with 40 clamps
Filler with 40 valve
12-head capper for plastic pre-threaded caps
SIPA cap elevator
Year: 2019
Type: mechanical
SIPA cap orientator
Year: 2019
ABL-TEPRO Labeller
Model: RLH16-1HM-1AA
Year: 2007
Direction of rotation: Counterclockwise
16 mechanical cam plates
1 hot-melt station for pre-cut paper wraparound label
SILGA bottle dryer
Makro labeller
Model: MAK-2 18P RLF
Year: 2019
Direction of rotation: Counterclockwise
18 mechanical cam plates
1 roll-fed station
Baumer shrink wrapper
Model: FLEX40
Year: 2015
Speed: 40 ppm
Film launch system
Type: film only
Smipack handle applicator
Model: HA60 DX
Year: 2010
Safety guards
Air conveyors for empty bottle transport
Conveyors for full bottle transport
Conveyors for shrink-pack transport
Reference NP 725

Equipment questions, answered.

What is the current listing status of reference NP 725?

Listed available. Confirm current availability with our team before planning a purchase.

What output is listed for this equipment?

The listing states 19,000 bottles/hr. This is the listed figure, not a performance guarantee for every application. Confirm the required product, containers and operating conditions.

What year is shown for this machine?

The listed year is 2019. The year alone does not establish condition, operating hours or refurbishment history.

Where can I see the technical information and photographs?

The full supplied technical description appears on this page. The gallery contains 20 listed images. Request additional information or an inspection if the supplied material does not answer your questions.

Can this equipment be considered for a U.S. plant?

Send your product, container formats, target output, plant destination and utilities. Suitability, electrical requirements, controls, included equipment and requested services must be confirmed for this specific listing.

Can I discuss delivery to Georgia?

Yes. Share the actual delivery location, access requirements and desired timing so the transfer scope can be reviewed. This destination example does not identify the machine’s current location.

Can import or export between Europe and the Americas be discussed?

Elitekno USA coordinates bottling equipment projects between Europe and the Americas. Equipment location, destination, packing, transport and any requested technical services are reviewed individually and defined in the proposal.

Start with reference NP 725

Let’s discuss this machine.

Tell us your product, container formats, required output and destination. We will review the listing and the technical information needed for your project.

No online purchase is completed through this form. Availability, pricing and service scope are confirmed in the proposal.

Keep comparing

Related equipment.

Explore the category